The PR System One REMstar BiPAP ST Machine is an intelligent solution that is one of the most versatile machines on the market for those who need Non-Invasive (NIV) Ventilatory Support. System One technology like Humidity Control with Dry Box are improving therapy effectiveness for BiPAP users.
Product Features
h3The PR System One REMstar BiPAP ST Machine comes standard with carrying case, bag, memory card, manuals and now comes packaged with the Respironics Performance Tubing.
System One Humidity Control (Optional)
The PR CPAP humidifier and water chamber design are breakthroughs for managing rain-out and water damage. System One Humidity Control technology analyzes ambient temperature and patient airflow to reach relative humidity at the mask. Choose from 5 levels of relative humidity. System One is the first humidifier in the industry which accounts for room humidity. Sensors, inside and outside the CPAP machine, closely monitor changes in humidity and help to prevent condensation from forming inside the tube.
Dry Box technology is another breakthrough in reducing water damage to the CPAP. Several unique designs are incorporated into the humidifier to prevent water from exiting the chamber. To start, the air outlet port has been moved from the side of the humidifier onto the top. This centers the entire delivery; minimizing the total water displacement around the hole. The water chamber is outfitted with one-way valve, between the machine and the humidifier. Any water that manages to escape the chamber gets trapped within the Dry Box, which acts as a reservoir for any water ingress past the valve.
System One and Dry Box Technology make it possible for the Respironics machines to be truly spill-free. This humidifier, even with a chamber filled to the "Full" indicator line, can be tilted, shaken, and even turned upside down without water leaking back into the device.
Digital Auto-Trak Algorithm and Bi-Flex Technology
Digital Auto-Trak Sensitivity is the brains behind Respironics' Flex Technology. A patented algorithm monitors breathing patterns and responds to abnormal pressure changes. The Auto-Trak system measures variable triggers and cycle thresholds, then adjusts pressure automatically to provide effective sleep therapy. The Digital Auto-Trak components are always active and the system reacts to the first component that detects a change in sleep, providing maximum sensitivity.
Bi-Flex Technology allows the PR BiPAP to track each breath and helps provide pressure relief during three critical points in the breathing cycle. Pressure is reduced by half centimeter increments during the transition from exhalation to inhalation, inhalation to exhalation and during exhalation.The Bi-Flex setting can be adjusted up to 1.5cm of water pressure for maximum comfort. Bi-Flex comes standard with the PR BiPAP Series and can be turned on when in BiLevel Mode and Auto Bi-Level Mode (also known as Spontaneous Mode).
The PR BiPAP ST mode overrides the Bi-Flex feature and responds to breathing patterns in the same manor, increasing pressure when you start to inhale and decreases pressure when you start to exhale. Unlike the BiLevel mode with Bi-Flex, Spontaneous Timed (S/T) Mode allows users to set the machine's Breathe Rate and Rise Time. Setting the Breathe Rate lets the machine know how many breaths per minute the system uses to calculate when to automatically switch from exhalation to inhalation. Rise Comfort is the time it takes for the device to change from EPAP to IPAP and can be set as follows: (0ff=150, 1=200, 2=300, 3=400 msec).
The PR BiPAP ST comes with the following modes:
Spontaneous
S Mode responds to users needs by increasing pressure when you start to inhale and decreases pressure when you start to exhale. The unit will not initiate a breath if you do not inhale.
Spontaneous Timed
ST Mode is similar to S Mode, but ST Mode will initiate a breath and automatically starts IPAP. When IPAP starts, the machine controls the duration of IPAP and automatically lowers pressure to EPAP within a set time.
Encore Data Management and Reporting
On-board memory has been added to the BiPAP as well as storing information on a generic SD Memory card and reads through any SD card reader. Use Encore Pro 2 Software to monitor therapy effectiveness through a series of reports. A new Patient Flow and Event report enables users to view a weekly breakdown on per-breath basis. Patient data is used to identify particular conditions and events with specific colors.
Return On Warranty Issues or Mask Assurance Purchase Only.
